Akai LT-2211HD

32
5.72 Sleep Timer
This item is used to adjust the Sleep Timer.
Available options: Off, 5/15/30/60/90/120/240 minutes.
5.73 Auto Sleep
This item is used to select desired Auto Sleep (standby) duration.
Available options: Off, 3/4/5 hours.
5.74 Time Zone
This item is used to select desired time zone.
5.75 Time
- Press OK or RIGHT navigation button to enter it.
- Press UP/DOWN navigation button to select desired item.
- Press LEFT/RIGHT navigation button to adjust the value.
Auto Sync: Synchronize the time with your
channel if Auto Sync is on. And you can adjust the
Date and Time when Auto Sync is off.
Power On Timer: Turn on/off auto power on timer.
You can adjust the Time, Power On Source,
Power On Channel when this timer is on.
Power Off Timer: Turn on/off auto power off timer.
You can adjust the Time when this timer is on.
To adjust the date and (or) time with Auto Sync OFF:
- Highlight the date and (or) time and press OK button to enter adjusting page.
- Press UP/DOWN navigation button to adjust it.
- Press OK button to confirm setting; press EXIT button to cancel it.
5.8 HDMI CEC Control
To use HDMI CEC function:
- Make sure the HDMI device (Amplifier, etc.)
is connected correctly.
- Press SOURCE button on the unit or remote
control to select HDMI input source.
5.81 HDMI CEC Control
This item is used to turn on/off HDMI CEC
(Consumer Electronic Control).