Akai LT-2211HD

36
PC/VGA MODE
- Connect a personal computer to this unit.
- Power on your computer and this unit.
- Press SOURCE button on the unit or remote control to select PC (or VGA) input source.
- Press MENU button to display the main menu and select Picture using LEFT/RIGHT
navigation button.
- Use UP/DOWN navigation button to highlight PC Setting and press OK or RIGHT
navigation button to enter it.
- Press UP/DOWN navigation button to
select preferred item.
- Press OK or RIGHT navigation button to
enter submenu. Press LEFT/RIGHT
navigation button to adjust the value.
1. Auto Adjust
This item is used to adjust the PC screen
automatically.
2. H Position
This item is used to adjust the value of horizontal position.
3. V Position
This item is used to adjust the value of vertical position.
4. Phase
This item is used to adjust the picture apply to the TV.
5. Clock
This item is used to adjust the signals transfer speed.