Copy Eff
Copies the content of the selected Effects set to a new Effect set location.
From
Selects the Effects set to be copied.
To
Selects the destination Effects set location. Press [DO IT] to execute the copy
operation.
Reset
Restores the selected Effects set to the default settings.
Eff
Selects the Effects set to be restored. Press [DO IT] to execute the Reset operation.
SEQ EDIT mode
Accessible by pressing [MODE] + [PAD 10] (SEQ EDIT). The following parameters can
be selected by scrolling the parameter directly.
Copy events
Allows the copying of events from one track to another, and one sequence to another
From
Selects the Sequence (S) and track (T) to be copied from.
To
Selects the Sequence (S) and track (T) to be copied to.
Pads
Selects which pads are to be copied. Default is ALL. Each pad is able to be
individually selected by hitting them. Multiple pads can be selected.
In
Selects the time where the events to be copied start.
Out
Selects the time where the events to be copied end.
Start
Selects the time where the selected events will be copied to.
Copies
Determined how many copies are to be placed in.
Mode
Selects how the copied events should be pasted in. MERGE or REPLACE.
DO IT
Press the [DO IT] button while on this page to execute the selected operation.
Move events
Allows the moving of events from one track to another, and one sequence to another,
deleting the events in the original location.
From
Selects the Sequence (S) and track (T) to be moved from.
To
Selects the Sequence (S) and track (T) to be moved to.
Pads
Selects which pads are to be moved. Default is ALL. Each pad is able to be
individually selected by hitting them. Multiple pads can be selected.
In
Selects the time where the events to be moved start.
Out
Selects the time where the events to be moved end.
Start
Selects the time where the selected events will be moved to.
Copies
Determined how many copies of the moved events are to be placed in.
Mode
Selects how the moved events should be pasted in. MERGE or REPLACE.
DO IT
Press the [DO IT] button while on this page to execute the selected operation.
Transpose
Increases or decreases selected events by semitone.
Edit
Selects the Sequence (S) and track (T) to be transposed
Pads
Selects which pads are to be transposed. Default is ALL. Each pad is able to be
individually selected by hitting them. Multiple pads can be selected.
In
Selects the time where the events to be transposed start.
Out
Selects the time where the events to be transposed end.
Amount
Selects the amount of transposition in semitones
DO IT
Press the [DO IT] button while on this page to execute the selected operation.
Shift timing
Shifts the timing of recorded events
Edit
Selects the Sequence (S) and track (T) to be shifted
Pads
Selects which pads are to be shifted. Default is ALL. Each pad is able to be
individually selected by hitting them. Multiple pads can be selected.
In
Selects the time where the events to be shifted start
Out
Selects the time where the events to be shifted end.
Shift
Selects the direction events are to be shifted.
Amount
Selects the amount of time the events are to be shifted in clock pulses.
DO IT
Press the [DO IT] button while on this page to execute the selected operation.
Edit velocity
Changes the velocity of recorded events
Edit
Selects the Sequence (S) and track (T) to be edited.
Pads
Selects which pads are to be edited. Default is ALL. Each pad is able to be
individually selected by hitting them. Multiple pads can be selected.
In
Selects the time where the events to be edited start
Out
Selects the time where the events to be edited end.
Mode
Selects how the velocity of the selected events will be edited.
Amount
Selects the amount of change to be applied.
DO IT
Press the [DO IT] button while on this page to execute the selected operation.
Edit Duration
Changes the duration of recorded events
Edit
Selects the Sequence (S) and track (T) to be edited.
To Next Page
Loading...
Need help?
General
