4
4
in the USB HUB ports. Hit TEST USB HUB and the app will see if these files exist on
the drives and generate a pass if two drives are found with these files.
5 Pin MIDI
Plug 1 MIDI cable from Out A to IN 1 and the other from Out B to IN 2. Hit Test 5 Pin
MIDI Group 1.
Then unplug from A and Plug into Out C
Unplug from B and Plug into Out D
So
Out C In 1
Out D In 2
Hit Test 5 Pin MIDI Group 2.
To Next Page
Loading...
