Fade Out
This function sets an automatic fade Out between the in and out point
of the selected section. The following fade types are available:
Linear Fade Out
This selection fades out the audio with a linear
curve. A linear curve will go from start to end with
no curve, creating a straight line.
Logarithmic Fade Out
This selection fades out the audio with a
Logarithmic curve. A logarithmic curve will quickly
loer, and then even out for the middle section,
lowering quickly again as it nears the end.
Exponential Fade Out
This selection fades out the audio with an
Exponential curve. An exponential curve will
slowly lower in the beginning, and then quickly
lower for the middle section, and then slowing
again as it nears the end.
[F4] (CANCEL) / [F5] (DO IT)
Press [F4] (CANCEL) to abort the Fade In operation. Press [F5] (DO IT) to apply the change.
To Next Page
Loading...
