Manufacturing Testing of MPD226 using ADT1 v0.7.5
3 March, 2015
This document is intended to describe the operation of the ADT1 Manufacturing Test
application for the Production Testing of MPD226.
Terms
MPD226: A USB Pad Controller. Also known as AD27.
ADT1: A Manufacturing Test application that runs on Windows computers.
Hardware setup
ADT1 expects the following connections to be made:
1. USB connection to Windows Computer running ADT1 Manufacturing Test
application.
2. MIDI IN connected to MIDI OUT for MIDI Loopback Test
To Next Page
Loading...
