22
USING THE MPK25 WITH STYLUS RMX
1. To use the MPK25 with Stylus RMX you will need to copy the Akai folder from the Spectrasonics-
StylusRMX MIDI Templates folder on the CD-ROM to the following folder on your computer:
SAGE/Stylus RMX/Patches/MIDI Learn
2. After you have copied the folder, load the Factory Preset on the MPK25 named SpectRMX.
3. Open your host software and open an instance of Stylus RMX.
4. Go to the lower right hand corner of the Stylus RMX interface and select the disk icon.
5. In the disk icon menu select MIDI Learn and then select Load Template.
6. Navigate to the Akai folder and choose the Spectrasonics Stylus RMX template.
AKAI MPK25 PRESET MAPPINGS
BANK A BANK B
K1 K2 K3 K4 K13 K14 K15 K16
Master Tone 1 Master Tone 2 Master Tone 3 Master Tone 4 Master Tone 5 Master Tone 6 Master Tone 7 Master Tone 8
K5 K6 K7 K8 K17 K18 K19 K20
Mixer Pan 1 Mixer Pan 2 Mixer Pan 3 Mixer Pan 4 Mixer Pan 5 Mixer Pan 6 Mixer Pan 7 Mixer Pan 8
K9 K10 K11 K12 K21 K22 K23 K24
Mixer Level 1 Mixer Level 2 Mixer Level 3 Mixer Level 4 Mixer Level 5 Mixer Level 6 Mixer Level 7 Mixer Level 8
S1 S2 S3 S4 S5 S6 S7 S8
Mute Part 1 Mute Part 2 Mute Part 3 Mute Part 4 Mute Part 5 Mute Part 6 Mute Part 7 Mute Part 8