EasyManua.ls Logo

Akai TX-3310

Akai TX-3310
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
E-7
TO INTERRUPT PLAYBACK:
1. Press the PLAY / PAUSE button.
•““ will appear.
2. Press the PLAY / PAUSE button to resume playback from the same point.
TO STOP PLAYBACK:
Press the STOP button.
TO REMOVE THE CDs:
Whilst in the stop mode, press the OPEN / CLOSE button.
The disc tray will open. Remove the two discs. Then press the DISC SKIP button to rotate the disc tray
and remove the remaining disc.
Selecting a desired track
Selecting a desired track at the stop mode
1. Press or button until desired track appears on the display.
2. Press button to start play.
Selecting a desired track during play mode
1. Press or button until the desired track appears on the display.
If you press button once it will skip to the beginning of the current track and play the track
again.
Searching for a particular passage during play
Press and hold or button until the desired passage is located.
During the search the sound is played faster than normal at reduced
Volume play returns to normal when or button is released.
CAUTION:
Only load to replace CDs on the two
forward disc holders. Do not try to force
a CD into the back disc holder as this
will cause the CD to become jammed
resulting in malfunction and / or
damage to the system.
Make sure that CDs are properly
placed in the disc holders.
Programmed play
Up to 60 tracks can be programmed to be played in any required order from one CD or all CDs in the CD
changer.
1. Press the MEMORY button
2. Press the DISC SKIP button to select the desired disc.
3. Press / skip button to select the desired track.
4. Press the MEMORY button again to store this track in memory.
5. To add additional tracks, repeat step 2 to 4.
6. To start play back press Play / Pause button.
7. Press STOP button to end program play.
To check the program
Press the MEMORY button during stop mode. The track numbers are displayed in programmed order.
To erase the program
Press the MEMORY button and the STOP button at the same time during stop mode.
NOTES:
During programmed play, random play is not possible.
English.pmd 3/22/2004, 3:00 PM7
DISCSKIPOPEN

Related product manuals