E-10
REMOTE CONTROL TRANSMITTER
BATTERY INSTALLATION
The infrared transmitter requires 3.0 volts for operation.
BUTTON DESCRIPTION
1. DISC SKIP – Press once to select the desire CD.
2. TIMER – To set the timer ON/OFF.
3. RANDOM/PRESET
For CD – To enable random play for CD.
For TUNER – To select the preset station in order.
4. PLAY/PAUSE – To start or interrupt CD playback.
5. TUNING/SKIP /
For CD – To select previous / next CD track.
– To search Forward or Backward within a track.
For TUNER – To select a lower / higher Tuner.
6. Stop – Press to terminate CD playback
7. PRESET EQ – To select sound control: JAZZ, ROCK, CLASSIC, POP.
8. VOLUME+/- – To adjust the volume.
9. CD – Press to select CD mode.
10. POWER button – To switch the unit to ON / STANDBY.
11. TAPE – Press to select TAPE mode.
12. TUNER/BAND – Press to select TUNER mode and select the desired waveband.
13. MUTE – To mute the sound output, press again to restore the sound
14. REPEAT/PRESET
For CD – To enable repeat play.
For TUNER – To select the preset station in order.
15. MODE – To display the actual time for a few seconds during
TUNER or CD and TAPE operation.
– To display the start / stop time when the timer is on.
– To adjust the start / stop time (Together with the timer
button).
16. MEMORY/CLOCK-ADJ – To program CD tracks or radio preset stations.
– To adjust the clock setting.
17. SLEEP – To activate the sleep function.
English.pmd 3/22/2004, 3:00 PM10
To Next Page
Loading...