E-9
B. RECORDING FROM CD - CD SYNCHRO START
– Press the CD button and load the desired disc.
• Use the program function to store the tracks you want to record in memory.
– Load a cassette into the TAPE B cassette compartment.
– Press RECORD key to start recording.
• Playing of the CD or program starts automatically. It is not necessary to start the CD player separately.
– To stop recording, press STOP/EJECT key.
NOTES:
The recording can be started from different positions:
– If the CD player is in pause mode, recording will start from this very position (USE SEARCH
OR );
– If the CD player is in stop mode, recording will start from the beginning of the CD or program.
SYNCHRONIZE DUBBING (USING DECK A / 1 & DECK B / 2)
Set in tape mode
– Insert a pre-recorded cassette with full reel on the left into Deck A / 1.
– Insert a blank cassette Tape with full reel on the left into Deck B / 2.
Normal speed dubbing
– Press the TAPE Function Selector, set the dubbing mode selector to “NORMAL” position.
– Press PLAY key of Tape A / 1 and Record Key together with the PLAY Key of Tape B / 2 at the some
time then both Tapes start dubbing synchronously.
– Adjust the VOLUME Controls to the desired output level and also for the monitoring purpose.
– To STOP DUBBING, press both STOP / EJECT Keys.
High speed dubbing
– Following the steps of normal speed dubbing procedure, but set the dubbing mode selector to “HIGH
SPEED DUBBING” position.
English.pmd 3/22/2004, 3:00 PM9
To Next Page
Loading...