Akai VS-X9EGN

The remote control contains operation buttons which are used the same way as the
operation buttons on the front panel of the Akai VCR, and many which appear on the
remote control only. The remote control can be used from a distance of up to 5 meters.
Channel number buttons. (Hidden under cover.)
Use these buttons for immediate access to any station
without scanning the whole band. For single digit stations,
press‘“‘0” and the number, or just the number itself.
Transmitter beam
POWER button. (Hidden under cover.)
TIMER button.
To stand-by for automatic recording.
DISPLAY button.
To choose the CLOCK/COUNTER and display it on the
TV screen.
Counter RESET button.
To reset the tape counter to “0000”.
Channel selector
Tape transport buttons
To set and store all the CLOCK and PROGRAM settings.
SET and SHIFT and MEMORIZE buttons.
PROGRAM button.
CLOCK button.
MEMO and CANCEL buttons.
Fig, 2-2
Saftey Lock System
This VCR can be locked to prevent access by small children. This feature can be operated by the remote
control only.
To lock: With the VCR POWER ON, depress and hold the remote control’s STOP button for about 4 seconds.
aa “L” will momentarily flash on the CHANNEL display. Tape play will not function unti! the VCR is
unlocked.
To unlock: Depress and hold the remote control’s PLAY button for about 4 seconds.
Even if the POWER is turned off, the VCR will remain locked until released.
C—O SERVICE MANUAL