Akai X-1810

Fig. 8
5. BRAKE TENSION ADJUSTMENT
(See Fig. 8)
For Brake Tension Measurement, use a 60 mm tape
wound ona 5” reel and measure with a Tension Gauge.
Standard tension is 280 to 330 grams. Adjust Brake
Tension by changing position of suspended springs (S 1
and S 2 in Fig. 8), loosening screws (A) and (B) and
changing position of spring suspension metal (C), or
loosening screws (D) (E) and changing position of F.
Caution: Following Brake Adjustment, confirm that the
Brake Band does not touch the cloth tape on
brake drum.
(See Fig. 10)
18