WiFi - Off, On for options, default is off.
Press to choose “WiFi”, press to enter setting and choose ”Off or On”, please refer
to “Turn on WiFi Connection”.
Date/Time - Set the date and time of dash cam.
Press to choose “Date/Time”, press and press or to adjust the date/time
settings, press to confirm and turn to next, after finishing, press to exit.
Time System - 12H, 24H for options, default is 12H.
Press to choose “Time System”, press to enter setting and choose ”12-hour system
or 24-hour system”, press to save and exist.
Beep Sound - Off, On for options, default is on.
Press to choose “Beep Sound”, press to enter setting and choose ”Off or On”, press
to save and exist.
Language - Set the language of dash cam, default is English.
Press to choose “Language”, press to enter setting and choose the language you
need, press to save and exist.
Parking Monitor - Off, On for options, default is off.
Press to choose “Parking Monitor”, press to enter setting and choose ”Off or On”,
press to save and exist.
Frequency - 50Hz, 60Hz for options, default is 60Hz.
Press to choose “Frequency”, press to enter setting and choose ”50Hz or 60Hz”,
press to save and exist.
GPS Speed - Off, On for options, default is on.
Press to choose “GPS Speed”, press to enter setting and choose ”Off or On”, press
to save and exist.
Fatigue Driving Reminder - Off, 1hour, 2hours, 4hours for options, default is off.
Press to choose “Fatigue Driving Reminder”, press to enter setting and choose
”Off or 1hour or 2hours or 4hours”, press to save and exist.
SPECIFICATIONS
Name
AKASO Trace1 Pro
Dash Cam
Model
Lens Angle
WiFi
Working
Temperature
Battery
300mAh
14℉ - 140℉
Built-in WiFi
170°
Trace1 Pro
2K30 / 1080P60 /
1080P DUAL 1080P
External GPS Module
2 inch IPS LCD Screen
8GB-128GB
(built-in 32GB)
Resolution
GPS
Screen
Micro SD Card
PRECAUTIONS
① Please safekeeping, prevent the lens from scratching and dirty.
② Please pay attention to anti-fouling and moisture-proof.
③ Do not expose the machine to the sun directly, prevent the built-in battery from
damage.
28
29
Format - Format the card on dash cam.
Press to choose “Format”, press to enter setting and choose ”SD Card”, press and
to choose “Cancel or OK”, press to save and exist.
Default Setting - Restore the original settings.
Press to choose “Default Setting”, press to enter setting and choose ”Cancel or OK”,
press to save and exist.
Version Info. - Check the camera’s version.
Press to choose “Version Info.”, press to view the camera’s version information, then
press to save and exist.
To Next Page
Loading...
Need help?
General
