- 83 -
Offline a sensor
You can manually offline any sensor by clicking on the green Online button on the sensor’s
configuration page.
You’ll be asked for confirmation in a popup window.
Note: if you change a sensor to “offline” it will no longer be displayed on the web interface. In order to
reactivate it, you have to toggle it back to “online”.
Smart Sensor Recovery
This feature will be used only for the new Smart Sensor type. The firmware can be updated on these
sensors automatically, and if the upgrade has failed for some reason and the sensor becomes
unresponsive, with this option you can recover them to the default firmware. It’s not used by other
sensor types.
To Next Page
Loading...
