6
Operating Your Wine cooler
It is recommended that you installed the wine cooler in a place where the ambient temperature is
between 10-26℃(50- 80°F) . If the ambient temperature is above or below recommended temperatures,
the performance of the unit may be affected. For example, placing the unit in extreme cold or hot
conditions may cause interior temperature to fluctuate. The optimal range of 10-16 ℃ (50-60°F ) may
not be reached.
The temperature may fluctuate depending on whether or not the interior light is on or off or whether the
bottles are located o
n the upper, middle or lower section.
How to use the press-buttons on the Display Panel:
There are three press-buttons on the panel.
“
” and “ ” to adjust the temperature by 1℃ within the range of 10-18℃(50-66°F).
You can turn the interior light on or off by pressing the “Light” button.
Care And Maintenance
Cleaning your wine cooler
Unplug the wine cooler and remove the bottles.
Wash the inside with a solution of warm water and baking soda. The solution should be about 2
tablespoons of baking soda to a quart of water.
The outside of wine cooler should be wiped down with mild detergent and warm water.
Draw out the water box at the bottom, and wash.
Moving your wine cooler
Remove all the bottles.
Securely tape down all loose items inside your wine cooler.
Turn the leveling legs up to the base to avoid damage.
Tape the door.
Make sure the wine cooler stays in the upright position during transportation.
To Next Page
Loading...