EasyManua.ls Logo

AKDY WC0013 - Troubleshooting

AKDY WC0013
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Troubleshooting
You can solve many common wine cooler problems easily, saving you the time or cost of a possible
service call. Here are some common problems and their respective solutions.
PROBLEM
POSSIBLE CAUSE
Wine cooler does not operate.
Not plugged in.
Plugged into an outlet not providing 110V/120V.
Breaker fuse tripped.
Wine cooler is not cold enough.
Check the temperature control setting.
External environment may require a higher setting.
The door is open too often.
The door is not closed completely.
The door seal does not seal properly.
The wine cooler does not have enough space in the
rear for venting excess heat.
The light does not work.
Light is defective.
Light is burned out.
Vibrations.
Check the adjustable legs to ensure that the wine
cooler is level.
The wine cooler makes too
much noise.
The wine cooler is not level.
Check the fan.
The door will not close properly.
The wine cooler is not level.
The doors is reversed and improperly installed.
The seal is weak/damaged.
The shelves are out of position.
LED does not display.
Main control board does not work.
PCB Problem.
There is some problem with the plug.
LED display error.
Defective LED display.
Thermostat error.
Buttons are not functional.
Temperature controller panel is damaged.