Akko 3061 Series User Manual

Akko Macro V1.0
Macro Setup Instruction 1
13
1. Akko Macro V1.0 is hardware-based and works without software-driven.
2. The following keys cannot be programmed: "Esc", "Fn", "Left Win" and "Right Win".
3. Press and hold Fn + Win for 3 seconds to switch to the Macro mode. When the keyboard is re-connected or the
system is restarted, the Macro mode will be exited. You need to switch to the Macro mode again to use
programmed keys.
4. Akko Macro V1.0 does not support simultaneous trigger, that is, pressing "AB" at the same time will trigger the
two keys in the order of A followed by B.
5. Akko Macro V1.0 does not support customized interval time, that is, the trigger interval between key A and key
B cannot be defined and will follow the system's default trigger time.

Akko 3061 Series Specifications

General

Model	3061 Series
Keycap Material	PBT
Layout	60%
Number of keys	61
RGB Lighting	Yes
Hot-swappable	Yes
Backlight	RGB
Switch Type	Akko CS Switch
Connectivity	USB Type-C
Compatibility	Windows, macOS
Battery Capacity	No