Bluetooth Setup Instruction 1
1. Switch to Bluetooth mode
2. Set the Bluetooth profile
① When the keyboard remains unplugged, turn the back switch to ON. Then long press and hold Fn + E / R / T to start
pairing with Bluetooth devices. The keyboard will enter Bluetooth pairing mode when the blue LEDs under E / R / T keys
flash quickly.
② When the Keyboard is plugged into the computer through USB interface, it will enter Bluetooth mode automatically
without having to push the switch on the back. Users can directly long press and hold Fn + E / R / T to enable
Bluetooth pairing. The keyboard will enter Bluetooth pairing mode when the blue LEDs under E / R / T keys flash
To help user recognize individual Bluetooth device, the keyboard is equipped with both Bluetooth 5.0 and 3.0
frameworks. The device name under the Bluetooth 5.0 framework is 5087BP-1 / 5087BP-2 / 5087BP-3 while the device name
under Bluetooth 3.0 is Akko 5087BP BT3.0. Once the devices are paired through Fn + E/R/T, the system will by default
memorize the last connected device before you turn off the Bluetooth mode.
To Next Page
Loading...
Need help?
General
