030098=Lion.mp3 ……... Code 98, loop this file.
040001=Tiger.mp3 …….. After play this file, jump to play 01
Explanation of example 1:
After powering up, the SR6 will loop Cats.mp3.
If input 1 is triggered, Bird.mp3 will play. While playing SR6 will ignore other
inputs (NO INTERRUPT). After playing SR6 will return to root and loop Cat.mp3.
If input 2 is triggered, Cat.mp3 will play. After playing SR6 will wait for input.
If input 3 is triggered, Lion.mp3 will loop.
If input 4 is triggered, Tiger.mp3 will play. After finish playing, SR6 will
automatically play Bird.mp3.
Example 2:
Special IR function using a single push button to play different files
sequentially.
F:\
Cats.mp3 (file in the root directory needed for Inputs)
Playlist.txt (this is a text file)
TEST:\ (note: this is a File folder)
Bird1.mp3
Bird 2.mp3
Bird 3.mp3
Bird 4.mp3
Bird5.mp3
Bird6.mp3
And below is the content of the Playlist.txt:
playlist.txt
IRMODE=YES ……… Capital letters only, set SR6 to IR mode.
LOOP=6 ……………. Set SR6 to play 6 files only.
600000=Bird1.mp3
610000=Bird2.mp3
620000=Bird3.mp3
630099=Bird4.mp3
640099= Bird5.mp3
650000= Bird6.mp3
Explanation of example 2:
After powering up, the SR6 will loop Cats.mp3.
SR6 will automatically enter IR mode because of this statement: IRMODE=ON.
It is also ready to play lines 60xxxx to 99xxxx in the playlist.
If input 4 (next) is triggered, Bird1.mp3 will play. After playing SR6 will return to
home position and loop Cats.mp3.
If input 4 (next) is triggered again, Bird2.mp3 will play. After playing SR6 will
return to home position and loop Cats.mp3 etc.
After playing Bird6.mp3, SR6 will recycle ready to play Bird1.mp3 again.
To Next Page
Loading...