1.
Open the battery cover
2.
Fit two “AAA”
batteries (Not supplied). Ensure the battery polarities are correct i.e
+ to +
and –
to -.
3.
Replace the battery cover
To prevent injury, do NOT break open or throw exhausted batteries in a fire. Do not
place in the domestic waste, consult your local waste disposal company.
Do not mix batteries, old and new, Carbon or Alkaline.
Do not use re chargeable batteries.
Remove batteries if not using the remote control for long periods to prevent leakage.
If the batteries do leak, clean the compartment with soapy water
and scrape any residue
from the contacts. To NOT touch or ingest battery residue.
4. In the event that the remote control does not function,
please check that the + VE end of
the battery terminals are in contact with the connection spring.
Some batteries have a
smaller + VE terminal and may not reach the spring. You can stretch the spring slightly to
ensure connection
5. Remote Control.
6
To Next Page
Loading...
