To display and configure Secondary SIP server settings.
This is for redundancy, if registering to Primary SIP server
fails,the IP phone will go to Secondary SIP server for
registering.
Note: Secondary SIP server is used for redundancy, it can be
left blank if there is not redundancy SIP server in user’s
environment.
To display and configure Outbound Proxy server settings.
An outbound proxy server is used to receive all initiating
request messages and route them to the designated SIP
server.
Note: If configured, all SIP request messages from the IP
phone will be sent to the outbound proxy server forcefully.
To display and configure Transport type for SIP message
UDP: UDP is an unreliable but very efficient transport
automatically within registration period.
To Next Page
