Akw M11 DigiPump User Manual

Please read all instructions before installation and leave this document with the end user for future reference as
it contains important warranty information
M-Series DigiPumps
INSTALLATION AND USER MANUAL

Akw M11 DigiPump Specifications

General

Brand	Akw
Model	M11 DigiPump
Category	Water Pump
Language	English

Summary

Box Contents & Specifications

Plumbing Zone

Electrical Installation

Important Safety & Electrical Information

Fixing Pump to Surface

Setting Flow Direction

Plumbing Connections

Fitting Flow Sensor(s)

Connecting Flow Sensor(s)

Pump Set Up

Pump Settings

Sensor Type Settings

Start Delay Settings

Run-On Time Settings

Calibration Settings

Testing the Pump

Commissioning Checks

Care and Maintenance

Trouble Shooting

Pump does not activate when shower is turned on

Troubleshooting steps when the pump does not activate.

Pump comes on but does not draw water

Diagnosing issues when the pump runs but doesn't draw water.

Pump does not draw water (cont.)

Continued troubleshooting for pump not drawing water.

Pump does not remove enough water

Diagnosing issues when the pump has low water removal.

Pump is noisy

Troubleshooting steps for a noisy pump.

Water is left in the tray when shower is turned off

Addressing issues with water remaining in the tray.

Water in tray after while