AL-KO click fix - Maintenance, Repairs, and Disposal; Lubrication and care; Repairs and spare parts; Product disposal

GB
111 367 548_c
“Click Fix”
Maintenance and care
AL-KO lifting supports should be cleaned after every journey and lubricated at regular intervals.
Greasing the gears - 3 Greasing the socket - 4
1. Lower foot by approx. 5 rotations.
2. Tip the holder (1) backwards.
3. Push up the spring stop (2).
4. Apply grease to the gears through the aperture in
the cover.
1. Clean and grease the socket.
Greasing the threaded rod -
5 | 6 Optional retrot variant - 7
1. Remove linch pin or at head screws and pull out
foot
5.
2. Grease the threaded rod
6.
3. Insert foot and secure with linch pin or at head
screws.
4. Retract the support all the way to the stop to distrib-
ute the grease evenly.
1. Remove at head screws (1, 2).
2. Spray threaded rod with lubricating spray.
3. Screw at head screws back in and secure with a
locking agent.
4. Retract the support all the way to the stop to distrib-
ute the grease evenly.
Repairs
If repairs are necessary, an extensive network of AL-KO service stations is available for our customers across Europe.
You can request the service station directory from us whenever you need using the order number 371912.
Caution!
Repairs may only be carried out by competent, trained personnel.
Only use spare parts approved by the manufacturer.
Spare parts are safety parts!
For installation of spare parts in our products, we exclusively recommend original AL-KO parts or parts expressly
approved by us for installation.
In order to clearly identify spare parts, our service stations require the spare part
identication number [ETI].
Disposal
Products, batteries and rechargeable batteries that are no longer required must not be disposed
of with household waste!
Packaging, product and accessories are manufactured using recyclable materials and must be disposed
of accordingly.