GB
91 367 548_c
“Click Fix”
Product description
AL-KO lifting supports are protected against corrosion. They are used for supporting and stabilising a parked mo-
torhome. The AL-KO lifting support “Click Fix” is available in two versions:
Foot adjustable using linch pin Foot adjustable using 2 at head screws
3
1
2
1 Drive shaft
3
1
2
1 Drive shaft
2 Linch pin 2 Flat head screw
3 Adjustable foot 3 Adjustable foot
Order number: Order number:
123 9339 / 340
123 9346 / 347
123 9351 / 352
123 9300 / 301
Both versions allow adjustment of the ground clearance in three positions. The device is secured in the required posi-
tion using either a linch pin or two at head screws.
Auto-pivot mechanism
If the motorhome is moved while the support is still extended, the support automatically pivots forwards or backwards.
This prevents possible damage to the support or vehicle.
Scope of supply
1 Designation Quantity Manufacturer
1 AL-KO Lifting Support 1
2 Installation plate (variant A) 2
ALOIS KOBER GmbH
3 M10 hexagon nut 4
Ichenhauser Strasse 14
4 Washer, 10.5 4
89359 Kötz, Germany
5 Plate (variant B) 2
Telephone: +49 (0)8221 970
6 Operating instructions 1
Internet www.al-ko.com
A suitable crank handle can be ordered separately from our customer service department.
Telephone: +49 (0)8221 970 | Fax: +49 (0)8221 978560 | e-mail: fahrzeugtechnik@al-ko.de
Galvanised crank handle, 665 mm long | Order number: 205 520
Galvanised crank handle, 865 mm long | Order number: 267 363
To Next Page
Loading...