What to do if my AL-KO Tiller motor does not start?
If your AL-KO Tiller motor doesn't start, try the following: * Refuel with petrol. * Move the throttle lever to the "START" position. * Connect the spark plug connector to the spark plug. * Check the spark plug and replace it if necessary. * Clean the air filter.
Why does my AL-KO MH 5005 R motor lose power?
If the AL-KO Tiller motor loses power, the air filter may need cleaning, or the tiller blades may need to be cleared of decaying plant residue. Clean the air filter and clear any decaying plant residue from the tiller blades.
Information about the manual's purpose and scope for safe operation.
Explains the meaning of various symbols used in the documentation for clarity.
Outlines essential safety precautions for operating the machine to prevent injury.
Instructions for attaching the depth skid to the cultivator.
Instructions for attaching the transport wheel for easy movement.
Instructions for attaching the handlebar support securely.
Setting handlebar and depth skid before starting operation.
Procedures for starting/stopping motor and engaging/disengaging blades.
Fine-tuning Bowden cables for proper machine operation.
Guidelines for storing the cultivator and its proper disposal.
To Next Page
General
