What to do if my AL-KO MH 5060 R Tiller engine doesn't start?
If your AL-KO Tiller's engine won't start, try the following: Refill the fuel tank, set the saturator lever to the "START" position, ensure the sparking plug connector is correctly fitted, inspect and possibly replace the sparking plug, and clean the air filter.
How to fix AL-KO MH 5060 R Tiller weeder shares that do not rotate?
If the weeder shares on your AL-KO Tiller aren't rotating, it could be due to the Bowden string of the weeder shares not being set properly. Also, the weeder shares may be loose on the clutch shaft. For damaged cone belt or clutch failure, contact an authorized service.
Why does the AL-KO Tiller engine output drop?
If the engine output of your AL-KO Tiller drops, the air filter may be dirty or the weeder shares may be obstructed by vegetation. Try cleaning the air filter and removing any vegetation from the weeder shares.
Crucial warnings for safe machine operation and user protection.
Specific safety checks and procedures before starting the engine.
Guidelines for safe use, handling, and transport.
Step-by-step guide to starting the engine correctly.
To Next Page
General
