What to do if my AL-KO PRO 140 OHV Engine does not start?
If your AL-KO Engine doesn't start, try these solutions: Replenish the fuel. If the fuel has been stored for a long time without a stabilizing agent, drain it and replace it with fresh, clean fuel. Inspect the spark plug; replace it if needed. If the spark plugs are wet, dry them out and reinstall them. Also, clean the air filter.
General| Engine Type | 4-stroke OHV |
|---|---|
| Displacement | 139 cc |
| Starting System | Recoil starter |
| Cooling System | Air-cooled |
| Shaft Rotation | Counterclockwise |
| Fuel Type | Unleaded petrol (min. 90 RON) |
| Oil Capacity | 0.6 L |
| Shaft Size | 22.2 mm |
Details and explains various symbols used within the operating instructions and on the equipment.
Provides important warnings and explanations for symbols found on the engine or its components.
Specifies the engine's designed purpose for private use with lawn tractors.
Outlines critical safety precautions for operating the engine, including warnings.
Lists key technical specifications for PRO 140 OHV and PRO 160 OHV engines.
Guidelines for safely transporting the engine, including fuel tank requirements.
Essential pre-start checks for the engine's general state and safety.
Instructions and recommendations for filling the engine with fuel and oil.
Procedures for starting the engine safely and guidelines for proper storage.
Covers essential maintenance tasks, including engine shutdown and spark plug checks.
Detailed steps for replacing the air filter and changing the engine oil.
Procedure for checking and servicing the engine's spark plug.
Recommended intervals for routine maintenance tasks based on usage.
Information on recommended spare parts and available customer support.
Guidelines for the environmentally friendly disposal of the machine and its components.
Common engine faults and their solutions for starting and running issues.
Details on warranty coverage, conditions, and how to make a claim.
To Next Page