Need help?Do you have a question about the AL-KO Tech 160 OHV and is the answer not in the manual?
General| Engine Type | 4-stroke OHV |
|---|---|
| Max. Torque | 9.5 Nm |
| Fuel Tank Capacity | 1.0 L |
| Oil Capacity | 0.6 L |
| Starting System | Recoil start |
| Cooling System | Air-cooled |
| Ignition System | Transistorized magneto ignition |
| Displacement | 160 cm³ |
| Fuel Type | Petrol |
Explains symbols used on the title page for safe operation and handling.
Defines signal words like DANGER, WARNING for identifying hazardous situations.
Specifies the intended use of the engine for driving lawnmowers and notes misuse consequences.
Details important symbols on the appliance itself, including warnings about carbon monoxide.
Lists and identifies key components of the engine based on diagrams.
Outlines requirements and restrictions for operating personnel, including age and sobriety.
Covers general safety measures for protecting people, animals, and property during operation.
Provides critical safety guidelines for handling flammable petrol and oil, including fire and explosion risks.
Perform a visual inspection of the engine for leaks, damage, and proper assembly before operation.
Critical safety precautions and steps for refilling the fuel tank with petrol.
How to check the engine oil level using the dipstick before starting.
Procedures and recommendations for adding engine oil to the correct level.
Instructions for safely filling the fuel tank with the correct type of petrol.
Step-by-step guide on how to start and stop the engine safely and correctly.
How to tilt the engine correctly for maintenance or other tasks.
Instructions for cleaning the air filter to ensure optimal engine performance.
Detailed steps for draining and refilling the engine oil.
Procedure for inspecting, cleaning, and setting the spark plug.
Instructions for cleaning the engine exterior, including cooling system.
Note that carburettor adjustments should only be done by authorised workshops.
A table outlining recommended maintenance activities and their intervals.
Troubleshooting steps for when the engine fails to start, covering fuel and spark plug issues.
Diagnosing and resolving issues causing the engine to run unevenly.
To Next Page