What to do if my AL-KO PRO 160 OHV does not start?
If your AL-KO Engine doesn't start, try these solutions: Replenish the fuel. If the fuel has been stored for a long time without a stabilizing agent, drain it and replace it with fresh, clean fuel. Inspect the spark plug; replace it if needed. If the spark plugs are wet, dry them out and reinstall them. Also, clean the air filter.
General| Engine Type | 4-stroke OHV |
|---|---|
| Fuel Type | Petrol |
| Starting System | Recoil |
| Cooling System | Air-cooled |
| Engine Speed | 2800 RPM |
| Shaft Diameter | 22.2 mm |
| Shaft Type | Vertical |
| Oil Capacity | 0.6 liter |
Explains common safety and operational symbols used in the manual.
Describes the meaning of symbols found on the engine itself.
Details on carburetor adjustments and who can perform them.
Instructions and warnings for checking ignition sparks.
Information regarding repairs and the use of original spare parts.
Procedure for cleaning and replacing the air filter.
Steps for draining and refilling engine oil.
Guidance on checking and replacing the spark plug.
To Next Page