Aladdin ALL200 - Step 9: Shim and Adjust for Plumb Cable; Step 10: Fasten ALL200 to Joists

STEP 9
Shim and adjust ALL200 so that winch cable hangs plumb through center of hole in top contact plate on
ceiling box. See Diagram E. Look up at ceiling box from oor level to verify cable is plumb.
https://youtu.be/wpEWV0C0VCM
Never install the ALL200 where the cable is not plumb through the center of the ceiling box. is could
interfere with the automatic shuto system and could cause the chandelier to fall, which could cause
death, personal injury, and/or property damage.
Wood Screws
Washers
STEP 10
Fasten ALL200 to oor joists using wood screws (part A) and washers (part B) included in parts bag. See
Diagram F.
Never install the ALL200 without properly fastening it to the oor joists. is could interfere with
the automatic shuto system and could cause the chandelier to fall, which could cause death, personal
injury, and/or property damage.
Conrm winch cable
hangs plumb through
center of hole in
top contact plate on
ceiling box.
Diagram E
Diagram F
View from Floor Level