To Next Page
M
Michael HebertAug 18, 2025
Why is my Alamo Industrial FALCON 15/10 Lawn Mower vibrating excessively?
- ZzdeleonAug 18, 2025
Excessive vibrations in your Alamo Industrial Lawn Mower can stem from several issues. Check and tighten any loose spindle and mower bolts, as well as nuts on the blade holder and blades. Inspect for a bent output shaft, and replace it if necessary. Ensure blades swing freely and are not stuck. Weigh the blades to confirm they are within 1 oz. of each other, and replace blades in sets. Other potential causes include a bent blade carrier (replace it), a blade hub not properly seated on the shaft (remove, clean, and replace), or mismatched blades or bolts (replace in sets).
General
