6
TX
A
B
When pairing is complete (after 5-30 seconds) will
be illuminated on the HearLink PLUS panel.
Successful connection of the BeHear PROXY neck
speaker is indicated by the illuminated or on the
HearLink PLUS panel.
TX
4. To restore connection between BeHear PROXY and
Hearlink Plus transmitter:
Place HearLink PLUS into pairing mode with a short
press on its button.
When in pairing mode the indicator light will flash TX
quickly.
Turn OFF BeHear PROXY.
Shift its power switch up and hold it until the voice
prompt says: “Pairing mode active” and the LED blinks
in alternating red and blue.
Place the BeHear PROXY neck speaker close to the
HearLink PLUS device.
To Next Page
Loading...