Need help?Do you have a question about the Alango Technologies BeHear PROXY and is the answer not in the manual?
General| Brand | Alango Technologies |
|---|---|
| Model | BeHear PROXY |
| Category | Hearing Aid |
| Language | English |
Connect HearLink PLUS to a power outlet or TV USB port using the supplied USB power cable.
Connect the HearLink PLUS TX port to the TV via optical or 3.5mm audio cable.
Turn on the BeHear PROXY by sliding the power button until it vibrates and the LED turns light blue.
Check for illuminated A and LL indicators on HearLink PLUS for successful connection.
Control audio playback, volume, and pause/play using buttons on the HearLink PLUS.
Manage audio playback, volume, and pause/play using controls on the BeHear PROXY neck speaker.
Charge the neck speaker from a wall outlet or computer USB port; LED indicates charging status.
Ensure TV audio out is active and toggle Play/Pause on the BeHear neck speaker or HearLink PLUS.
Briefly shift the BeHear PROXY Power button to reconnect it to the HearLink PLUS transmitter.
Place devices in pairing mode to restore connection between BeHear PROXY and Hearlink Plus transmitter.
Use HearLink PLUS Bypass mode to maintain existing interfaces between TV and peripheral audio equipment.
To Next Page