Getting to know your CD Radio Boombox
12
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Getting to know your CD Radio Boombox
You’ll be up and running in no time
Connection
Please consider carefully where your boombox will be situated and make sure that it is:
• on a flat and stable surface
• within 1.4 metres of a power socket
• where you can fully extend the wire radio aerial
• at least 1 metre away from other electrical appliances to avoid interference.
1. Unwind the power cable from the back of the boombox.
2. Extend the wire radio aerial. A vertical position is recommended for maximum signal
strength.
3. Plug the mains power plug into the mains power wall socket and switch on (Fig 2).
The red power LED to the left of the display will light up.
Fig 2. .
To Next Page
Loading...
