Page 5
User instructions
Getting started
Before use the MP3 player will require charging fully. Follow the below
instructions to charge the MP3 player.
1: Using the usb charging cable connect the mini usb plug into the usb
charge socket (4) on the side of the unit.
2: Connect the other end of the cable to a laptop/pc usb input or
compatible usb mains charger.
3: Power on the pc/laptop or charger.
4: Set the ON/OFF switch (3) to the ON position. During charging the red
charge led (5) will flash and when fully charged go off.
NOTE: We strongly recommend charging only via pc/ laptop to
avoid irregular led status light operation.
To Next Page
Loading...
