Page 7
User instructions
Earphone connection
Instructions for earphone usage.
1: Connect the 3.5mm earphone plug into the EARPHONE socket (2) on
the unit.
2: When the volume is adjusted above 85dB an audible warning sound
will be heard to warn you of excessive sound pressure. This will not
be heard again until you lower the volume below 85dB and raise once
more.
To prevent possible hearing damage, do not listen
at high volume levels for long periods.
If you hear no sound during playback, do not turn
the volume up as the music may suddenly begin
at a high volume.
Excessive sound pressure from earphones and headphones can
cause hearing loss.
To avoid damaging your ears, adjust the volume to the lowest safe
level before playing, and turn up to the desired level when playback
has started.
To Next Page
Loading...
