Need help?Do you have a question about the Albany RCA L and is the answer not in the manual?
Provides contact information for Albany Door Systems, the manufacturer of the door.
Details the copyright of the operation manual and the door system.
Explains the door's vertical opening mechanism, components, and operational principle.
Lists maximum opening speeds based on door size.
Details the internal safety tests for photocells and control units before downward movement.
Discusses optional safety systems like light beam barriers and motion detectors for specific applications.
Covers the electrical drive system, specifications, voltages, and technical data of the door.
Outlines the warranty terms for door systems and rubber curtains, including exclusions.
Specifies a lifetime warranty on the SBR curtain material and its conditions.
Defines the door's intended use and the operator's duties for safe operation and maintenance.
Explains warning symbols and provides critical general safety instructions for operation and maintenance.
Instructions for storing the door crate, emphasizing even ground and not removing it prematurely.
Refers to drawings for dimensions and advises on safe lifting methods to avoid tilting the crate.
States that components should only be removed from the crate at the installation site.
Guides on checking the shipment for damage, completeness, and preparing the installation site.
Details on plumbing, leveling, and squaring side frames for correct door alignment and operation.
Instructions on preparing the header assembly for lifting, including loosening the idler barrel and identifying lifting points.
Provides instructions and warnings for safely lifting the header assembly using a forklift.
Guides on aligning and bolting the header assembly to the side frames, including torque specifications.
Instructions for assembling the operator and adjusting the drive chain tension for proper operation.
Details on pre-charging counter balance springs using stamped values for pre-stretch and pre-turns.
Instructions for closing side frame covers and ensuring proper clearance for curtain travel.
Explains how to manually operate the door using the emergency chain hoist and disconnect mechanism.
Step-by-step guide for adjusting open, close, and stop limit switches for accurate door positioning.
Provides contact info for service and outlines safety precautions for inspection and maintenance.
Advises on cleaning methods for the door curtain, emphasizing the avoidance of petroleum-based products.
Explains the purpose, identification, and fastening of a wedge to correct curtain tracking issues.
A troubleshooting table listing symptoms, probable causes, and suggested actions for operator malfunctions.
Continues the troubleshooting table with additional symptoms, causes, and solutions for operator issues.
Details procedures for removing/reinstalling curtains and repairing rips or perforations in the rubber curtain.
Step-by-step instructions for safely replacing the operator's brake band, emphasizing power disconnection.
Guide on properly adjusting the operator brake band after replacement, detailing gap measurement and tension.
A schedule outlining lubrication and adjustment procedures at specified intervals for optimal door performance.
Information on gearbox maintenance and a table of torque specifications for various bolts used in the assembly.
To Next Page
General
