To Next PageTo Next Page
Need help?Do you have a question about the Albany UltraFabric and is the answer not in the manual?
Details warranty coverage for mechanical and electrical parts, specifying component durations.
Explains DANGER, WARNING, and CAUTION symbols indicating hazard levels and potential injury severity.
Defines symbols like Lock Out/Tag Out, Crushing, Fire, Shock, and Read Manual for operational context.
Covers checks for electrical supply, opening dimensions, and structural soundness before installation.
Lists necessary personnel, tools, and materials for performing the door installation.
Provides instructions for inspecting and preparing door components prior to installation.
Illustrates and explains appropriate wall anchoring methods for various wall materials.
Details marking the floor for accurate placement of door columns relative to the opening centerline.
Step-by-step instructions for assembling the door assembly when laid out on the floor.
Step-by-step instructions for assembling the door assembly directly against the wall.
Instructions for installing optional counterweights for the door's balancing system.
Procedures for ensuring the drum assembly is installed level and side columns are plumb.
Specific steps for assembling and anchoring Ultralite and Low Profile door models.
Detailed instructions for installing the chain hoist mechanism onto the drum shaft.
Guidelines and steps for mounting the door's defrost system brackets and components.
Instructions for assembling and wiring the Infrared heat lamp fixtures for the defrost system.
Procedures for properly aligning defrost lamps and blowers for optimal heat distribution.
A checklist of critical points to verify for the mechanical installation of the door.
Specific inspection points and questions for the UltraFreeze model doors.
A checklist of critical points to verify for the electrical installation and connections.
Checks for door start-up, operation functionality, and activation method verification.
General
