Need help?Do you have a question about the Albrecht AE 560 and is the answer not in the manual?
General| Brand | Albrecht |
|---|---|
| Model | AE 560 |
| Category | Transceiver |
| Language | English |
Identifies and describes the function of each control on the front panel.
Steps for powering on, setting squelch, selecting frequencies, and adjusting volume.
How to select frequency and use the PTT for transmitting.
How to select and use CTCSS tones for selective communication.
Details the two scanning modes: VFO Scan and Memory Scan.
How to scan across the entire tuning range.
How to scan through programmed memory channels.
How to use the priority feature to monitor a secondary channel.
How to select shift direction and set repeater offsets.
Method to adjust the frequency offset value.
How to change the transmit/receive shift direction.
Steps for recalling, writing, and clearing memory channels.
How to retrieve stored frequencies and settings.
Process for saving frequency, shift, and tone data to memory.
Procedure to restore factory settings and erase memory.
To Next Page
