Need help?Do you have a question about the Albrecht AE 550 and is the answer not in the manual?
General| Brand | Albrecht |
|---|---|
| Model | AE 550 |
| Category | Transceiver |
| Language | English |
Identifies and describes the function of the transceiver's primary controls and display elements.
Describes the VFO mode where frequency is displayed, active on power-on or VFO key press.
Explains memory mode, displaying frequency and memory address, accessed via the MR/MS key.
Details the Call mode, indicated by a 'C' on the display for direct access to the call frequency.
Procedure for setting transmit frequency offsets (+600KHz or -600KHz) for repeater access.
Steps to disable the repeater offset by pressing the F and LOCK/RPT keys.
Stores desired frequencies into memory channels (0-9) using F and MR/MS keys.
Stores a specific frequency (e.g., 145.50MHz) to the 'C' call channel for quick access.
Scans frequencies in VFO mode based on selected channel spacing.
Scans through all frequencies stored in the memory channels.
To Next Page
