Need help?Do you have a question about the Albrecht Tectalk Worker and is the answer not in the manual?
General| Frequency Range | 446.00625 - 446.09375 MHz |
|---|---|
| Transmission Power | 0.5 W |
| Battery Type | Li-Ion |
| Battery Capacity | 1200 mAh |
| Range | up to 10 km |
| VOX | Yes |
| IP Rating | IP54 |
| CTCSS/DCS | CTCSS and DCS |
| Operating Temperature | -20°C to +55°C |
Lists items included in the package with quantities.
Step-by-step guide for charging the battery pack using the drop-in tray.
Explains the LED indicator's color changes for transmission and reception.
Describes how to rotate the channel switch to select channels.
Details how to turn the transceiver on and off using the power switch.
Explains how to adjust the audio volume using the power switch.
Describes how to select a channel using the channel switch.
Instructs on how to transmit using the PTT button and microphone.
Explains the purpose of squelch and how it's adjusted.
Details the Time-out Timer purpose and its limit on transmission time.
Explains the usefulness and operation of the scan function.
Describes how to control voice announcements via PC or specific button presses.
Explains VOX for hands-free transmission and VOX Gain adjustment.
Describes the alert for low battery power and the indicator.
Explains the monitor function for hearing weak signals or adjusting volume.
Details the BCL function to prevent transmission on busy channels.
Explains CTCSS/DCS for selective calling and ignoring unwanted conversations.
To Next Page
