15
FNC +
– Locks and unlocks
the keypad.
RSM/HOLD Resume scanning or Holding
scanning.
L/O / PRI
L/O – Lets you lock out a
selected channel or skip a
specified frequency.
FNC + PRI briefly – Sets and turns the
priority function on or off.
FNC + PRI for two seconds – Sets a
channel as a priority channel.
Increment the channel number
and frequency, select the
search direction.
Decrement the channel number
and frequency, select the
search direction.
VOL/SQ / VOL/SQ – Switches volume
DELAY setting and squelch setting.
FNC + DELAY Change the delay time in Memory
Scan Mode, Memory Hold Mode,
Frequency Search Mode and
Frequency Hold Mode.
BAND / STEP BAND
– Select the band in
Frequency Search Mode and
Memory Scan Mode.
FNC + STEP Change the steps in Memory Scan
Mode, Memory Hold Mode, Frequency
Search Mode or Frequency Hold Mode.
PWR / LIGHT PWR
– Press and hold for more
than 2 seconds to turn the
scanner on or off.
FNC + LIGHT Turn the display back light on or off.
To Next Page
Loading...
