12
Transmitter
Transmission power CB AM 1 Watt / 4 Watts depending on country
FM max. 4 Watts
SSB max. 4 or 12 Watts PEP depending on country
Achievable power after AM approx. 6 Watts effective
Amateur radio modification FM approx. 15-25W effective
(only licensed amateur radio operators) SSB approx. 15-25W PEP
10 m Band 28.000 – 29.7MHz
Harmonic suppression min. 90dB (4nW)
Microphone sensitivity approx. 4mV / 1 kOhm
Supplied microphone: Electret with integrated pre-amp
Dynamic control range microphone-ALC 50dB
Power consumption during transmission max. 2.5 (AM)
max. 3.0A (FM, SSB)
Receiver
Receiver sensitivity for 12dB SINAD 0.5µV EMK FM/SSB
0.9µV EMK AM
Receiver neighbor channel selection 60dB FM/AM
70dB SSB
Clarifier control range +/- 1kHz
Steps setting range up to 500Hz/step
NF output power at 10% distortion factor min. 6 Watts, 4 Ohm
min. 4 Watts, 8 Ohm
Dimensions incl. protruding knobs/jacks 24.5 x 15.5 x 5.3 cm
Weight 1.3 kg
© Alan Electronics GmbH 2011
This documentation is not to be copied or duplicated for commercial purposes, entirely or in parts, without the
express written authorization of Alan Electronics GmbH.
To Next Page
Loading...
