Albrecht CDS - Default Chapter; Table of Contents

2
CDS
®
Knee Brace Amputation
User Instructions
Contents
1. Introduction .................................................................................................. 4
1.1. Foreword
..................................................................................................... 4
1.2. Customer information
.................................................................................. 4
1.3. Mode of operation
....................................................................................... 4
1.4. Application
.................................................................................................. 4
1.5. Scope of delivery
.......................................................................................... 4
1.6. Declaration of conformity
............................................................................. 4
1.7. Features
....................................................................................................... 5
1.8. Indications
................................................................................................... 5
1.9. Contraindications
......................................................................................... 5
1.10. Safety Instructions
...................................................................................... 6
1.11. Warranty
.................................................................................................... 6
2. Adjustment by the orthopaedic technician
.......................................... 7
2.1. Fitting to the patient
.................................................................................... 7
2.1.1. Adjusting the brace to the leg shape by using an
orthopaedic “bending iron”
.......................................................................... 7
2.1.2. Setting the shell components
.............................................................. 8
2.2. Setting the limitation
................................................................................... 9
2.2.1. Fine adjustment
................................................................................. 10
2.2.2. Inserting the stop wedge
................................................................... 11