Albrecht DR 460 - Info and Error Messages

24
11. Info and Error Messages
The following is a description of the info and error messages that the Wi-Fi radio
could possibly display.
Massage Type Description
Failed to
connect
Error Seen when a Wi-Fi network related error occurs. Some examples of
circumstances which will trigger a ‘failed to connect’ are :
- radio fails to connect to Wi-Fi network
- wrong network security key entered
Network
error
Error Seen when a server/connection related error occurs. Some
examples of circumstances which will trigger a ‘network error’ are :
- radio fails to connect to Wi-Fi network
- radio fails to connect to internet radio portal
- radio fails to connect to a radio station
- radio’s was streaming a station and connection fails midway
through the streaming
- radio fails to connect to a PC for streaming music
Format
error
Error Seen when the radio has problem playing the media due to
unsupported format type. Some examples of circumstances which
will trigger a ‘format error’ are :
- Radio tunes to a internet radio station which is being
transmitted using an audio codec not supported by the radio
(i.e. AAC+).
-
Radio tries to play a music file from a PC which is in a
format not supported
Connecting
…
Info Seen when the radio tries to establish connection with a network,
server, portal, station.
Loading… Info Seen once the radio has established connection, and starts
buffering the station/stream.
Playing Info Seen once the radio has completed connecting, and loading, and
starts playing the stream. This is the point when the station
becomes audible.