Alcatel-Lucent 7302 - I-011 G-P Interfaces and Interface Capacity; I-011 G-P Indoor ONT Interface Connection Capacity; I-011 G-P Connections and Components

21 — I-011G-P unit data sheet
21-4 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
21.4 I-011G-P interfaces and interface capacity
Table 21-3 describes the supported interfaces and interface capacity for I-011G-P
indoor ONTs.
Table 21-3 I-011G-P indoor ONT interface connection capacity
I-011G-P connections and components
Figure 21-1 shows the physical connections for I-011G-P indoor ONTs.
Figure 21-1 Physical connections on I-011G-P indoor ONTs
The I-011G-P indoor ONT supports data services from one 10/100/1000BASE-T
Ethernet port (CAT5 or better UTP cable). Full-duplex operation and
auto-negotiation between 10 Mb/s, 100 Mb/s, and 1000 Mb/s are also supported.
Table 21-4 describes the physical connections for I-011G-P indoor ONTs.
ONT type
and model
Maximum capacity
POTS 10/
100
BASE-T
10/
100/
1000
BASE-T
RF video
(CATV)
MoCA VDSL2 E1/
T1
Local
craft
GPON
SC/APC
I-011G-P — — 1 1 — — — — 1
Note — The I-011G-P indoor ONT is suitable for connection to
intrabuilding or non-exposed wiring or cabling only.
RF
RESET
Ethernet
port (RJ45)
Reset
button
F-Type
coaxial
connector
Power
connector
21444
Fiber
optic connector