Alcatel-Lucent Halo H3G - Page 56

Copyright @ALE 2020 All Rights Reserved
56
Permitted
Values
0:FollowKey
1:80ms
2:100ms
3:200ms
4:250ms
Default
0
Parameter
AudioDtmfFeedbackEnable
config.<mac>.xml
Description
It enables or disables DTMF feedback.
Permitted
Values
true
false
Default
true
Web UI
Setting ->Audio -> Enable DTMF Feedback
Parameter
AudioDtmfDuration
config.<mac>.xml
Description
It configures Configure the DTMF duration.
Permitted
Values
0:FollowKey
1:80ms
2:100ms
3:200ms
4:250ms
Default
0
Parameter
AudioDtmfLevel
config.<mac>.xml
Description
It configures bias value of DTMF tone level.
Permitted
Values
[-6,6]
Default
0
Web UI
Setting ->Audio -> DTMF Level
Suppress DTMF display allows IP phones to suppress the display of DTMF digits during an active
call. DTMF digits are displayed as “*” on the phone screen. Suppress DTMF display delay
defines whether to display the DTMF digits for a short period of time before displaying as “*”.
The following table lists the parameters you can use to configure the suppress DTMF display.
Parameter
DtmfMask
config.<mac>.xml
Description
It enables or disables the IP phone to suppress the display of DTMF digits during an
active call.
Permitted
Values
false
true
Default
false
Parameter
DtmfHideDelay
config.<mac>.xml
Description
The dtmf number will be hidden after a few seconds.
Permitted
Values
NUMERIC[0,5]
Default
1