Need help?Do you have a question about the Alcatel-Lucent Halo H6 and is the answer not in the manual?
General| Caller ID | Yes |
|---|---|
| Speakerphone | Yes |
| Intercom | Yes |
| Expandability | Up to 5 handsets |
| Type | DECT |
| Frequency | DECT 6.0 |
| Range | Up to 50m indoor, 300m outdoor |
Configures IPv4 and IPv6 addressing modes for Halo series phones.
Configures IPv4 parameters via DHCP options.
Configures IPv6 parameters via DHCP options.
Manages VLAN configurations for network segmentation.
Configures wireless network connectivity for the IP phone.
Configures NAT settings for sharing IP addresses.
Configures transmission settings for network ports.
Configures Virtual Private Network (VPN) connections.
Configures network access control using 802.1X authentication.
Configures IP phones via the web user interface.
Describes manual and central provisioning methods for phones.
Covers methods for upgrading phone firmware.
Lists firmware names associated with each IP phone model.
Configures firmware upgrade processes.
Procedure for upgrading firmware using a USB drive.
Changes the default administrator password for security.
Secures the IP phone against unauthorized use.
Provides secure communication using TLS protocol.
Encrypts audio streams during VoIP calls to prevent interception.
Configures audio codecs for call establishment.
Dual Tone Multi-frequency signals sent from IP phone keypad.
Ensures phone service continuity in case of server failure.
Forwards calls based on availability or manually.
Places an active call on hold.
Transfers an existing call to a third party.
Supports 5-way local and multi-way network conferences.
Configures programmable keys for DSS functions.
Allows users to log into shared phones.
To Next Page