Alcatel-Lucent Halo H6 - Ring Tones

Copyright @ALE 2020 All Rights Reserved
45
Parameter
DialingToneEnabled
config.<mac>.xml
Description
It enables or disables the dialing tone.
Permitted
Values
true
false
Default
true
Web UI
Setting -> General -> Dialing Tone Enabled
The phone can play a specific dial tone when it has new/unreaded voice messages received.
Topics
Stutter tone Configuration
Parameter
StutterToneEnabled
config.<mac>.xml
Description
It enables or disables the stutter tone.
Permitted
Values
true
false
Default
true
Web UI
Setting -> General -> Stutter Tone Enable
Ring tones are used to play for internal/external incoming calls. You can select a built-in ring tone
for the phone system or specific line registration.
You can also specify a period of time after which the IP phone will stop ringing if the call is not
answered.
Topics
Ringtone Configuration
The following table lists the parameters you can use to configure ringtone.
Parameter
AudioRingInternalChoice
config.<mac>.xml
Description
It configures internal call ring melody.
Permitted
Values
/usr/share/ringdata/ring00.wav
/usr/share/ringdata/ring01.wav
/usr/share/ringdata/ring02.wav
/usr/share/ringdata/ring03.wav
/usr/share/ringdata/ring04.wav
/usr/share/ringdata/ring05.wav
/usr/share/ringdata/ring06.wav
/usr/share/ringdata/ring07.wav
/usr/share/ringdata/ring08.wav
/usr/share/ringdata/ring09.wav
/usr/share/ringdata/ring10.wav
/usr/share/ringdata/ring11.wav