Copyright @ALE 2020 All Rights Reserved
String within 32 characters
Features -> DND->Off Code
Menu->Features->DND->Off Code
The following table lists the parameters you can use to configure DND in Custom mode.
TelephonyDndStateX
H3P/H3G: X=1~3
H6: X=1~4
It triggers the DND feature to on or off.
Note: It works only if “DndModeAccount” is phone to 1 (Custom).
0-Off
1-On, the IP phone will reject incoming calls on all accounts.
Features -> DND->Account ID->Enable DND
Menu->Features->DND->Account ID->DND Status
TelephonyDndOnCodeX
H3P/H3G: X=1~3
H6: X=1~4
It configures the DND on code to activate the server-side DND feature. The IP phone will
send the DND on code to the server when you activate DND feature on the IP phone.
Example:
TelephonyDndOnCode2 = *78
Note: It works only if “DndModeAccount” and “TelephonyDndState2” are both phone
to 1(Custom).
String within 32 characters
Features -> DND -> Account ID -> On Code
Menu->Features->DND->Account ID->On Code
TelephonyDndOffCodeX
H3P/H3G: X=1~3
H6: X=1~4
It configures the DND off code to deactivate the server-side DND feature. The IP phone
will send the DND off code to the server when you deactivate DND feature on the IP
phone.
Example:
TelephonyDndOffCode2 = *79
Note: It works only if “DndModeAccount” phone to 1(Custom) and
“TelephonyDndState2” phone to 0.
String within 32 characters
Features -> DND-> Account ID->Off Code
To Next Page
Loading...
